웹디자인 강의
Photoshop [허접시리즈] 이번에는 Radial Star 효과에 대해 알아봅시다.
2002.11.06 16:57
Radial Star 효과에
대해 알아봅시다.Xrezae의 열세번째 강좌입니다
effect of Radial Star This is my 13th lecture on Photoshop
완성 이미지 입니다.^_^;
It is a completed image^_^;
저작권??
그딴거 없습니다. 퍼가셔도 좋습니다. 하지만 출처는 적어주셨으면
하는 바램입니다.
Copyright?You do not need that. You may copy it as much
as you want. But I hope you authenticate the source.
우선 뉴로 새로운 파일을 만들고요....
At first, you should make a new file with ‘the new’ bar.
아래와 같은 창이 뜨면 알아서들.-_-;;무책임한..
Name에
제목쓰시고 Width는 가로 크기를 정하느곳입니다.
Height는 새로 크기입니다.
저는 250 250으로 했습니다.
그리고는 OK를 눌러주세요 그러면..
You may see a window for the new file, then it is up to you…-_-;;
I am not
responsible for that….Write your name on the small white box with
‘untitled’On
the small box of ‘Width’, you may set the horizontal size of an
image ttat you
want to make.On the small box of On the small box of ‘Height’,
you can decide the vertical size of the image.I
set those
by 250*250And, click ‘OK’ button..
으로 아래와 같이 창이 뜨면...된 것입니다. 그런데..눈금이
안나오신다면...View > Show Rulers를 선택하시면
나옵니다.
you cannot find the scales…Click ‘View’ and then ‘Show Rulers’
at the bar above.So you will see the scales.
파란색
으로 색을 채워 줍시다.
전 R:0, G:26, B:181 로 했습니다.
아래 처럼 에어브러쉬 툴을 선택 하시고
And click ‘Air Brush’ at the tool bar as below..에어브러쉬로 아래 같이 그려줍니다.
아무렇게나
그리셔도 됩니다만 너무 길게 그리시면
보기가 별루 안좋겠죠???
You may draw everything you want..But, if you draw too long,
it may not look so beautiful???
Filter > Blur > Radial Blur 를 해줍니다.
그럼 아래와 같이 나오겠죠??
아래와
같이 설정후에 확인을 해줍시다.
will appear on your screen.After that, set the amount at 100, choose
‘Zoom’ in the ‘Blur Method’, and choose ‘Draft’ in the ‘Quality’.
And then click ‘OK’.
Filter > Blur > Radial Blur (단축키 Ctrl+F)을 3번 정도 줍니다.
You repeat ‘Filter > Blur > Radial Blur’(the shortened key ‘Ctrl+F’) three times.
레이어를 복사하신후에 블렌딩 모드를 Overlay
로 줍니다.
그리고 이미지를 합쳐주신후
Then, combine the image
Filter > Adjust > Curves
(단축키 Ctrl + M) 를 해준다음에
아래와 같이 설정해 주신후 확인을 하시면
in order at the menu bar, and then fill out the white small boxes
with RGB in Channel, 240 in Input, and 55 in Output, and finally
click ‘OK’ button,
아래와 같이 나오는군요 심오한 이미지가 나오네요 ㅋㅋ
A profound image comes out in front of you….wow…Image > Adjust > Desaturate
(단축키 Ctrl + Alt + U)를 한다음
Image > Adjust >
Invert (단축키 Ctrl + I) 를 해줍니다.
그럼 아래와 같이 뜨겠죠 -_-;
아직도 지저분 하네요
you choose ‘Image > Adjust > Invert’ (the shorten key Ctrl + I)’
at the menu bar. If so, another image appears on your screen. -_-;
But it is still messy
아까햇던 Filter > Blur > Radial Blur를 또해줍니다.
아까와 같이 설정해주시고 이번엔
Quailty 를 Best 로
설정한후 확인을 합니다.
As you did just before, set the amount at 100, choose ‘Zoom’ in
the ‘Blur Method’, but choose ‘Best’ instead of ‘Draft’ in the
‘Quality’. And then click ‘OK’.
아하 !! Good!!! 아주 깨끗한 이미지가 뜨네요 ^^;
Wow, Great! It is much more clear than the previous one…^^;Image > Adjust > Brightness/Contrast
를 해줍니다.
그리고 아래와 같이 맞춰 주시고 확인을 눌러 주세요
Brightness at ?8 and the Contrast at +34, then click ‘OK’
그리고 Image > Adjust > Hue/Saturation를
실행해서 적당한 값을 줍니다. 여기서저는
Hue 205 Saturation 50 Lightness 으로 줬습니다.
degree as much as you like.. I gave 205 for Hue, 50 for Saturation,
and 0 for Lightness.
아까햇던 Filter > Blur > Radial Blur를 또해줍니다.
아까와 같이 설정해주시고 이번엔
아까와 같이 Best 로
설정한후 확인을 합니다.
And set the amount at 100, choose ‘Zoom’ in the ‘Blur Method’,
but choose ‘Best’ in the ‘Quality’ as just before. And then click ‘OK’.
드디어 완성 되었네요 RadialStar 효과 ^^:
Finally ,the image completed. What a beautiful effect of ‘Radial star’! ^^:- 강좌를마치면서 -
이번강좌는 구름 효과
Cloude 효과를 안주고 한번 해보았습니다.
이것도 제대로만 만든다면 엄청 멋찔것
같군요 역시 노하우와
연습만이 생명입니다.
I completed the image of Radial Star without a cloud effect on this lecture.